Small magnetic sheet automatic marking and magnetizing equipment_ Hangzhou Mingzhe Magnetic Technology Co., Ltd

Product Features

The device has two modes:

A mode: Automatic marking and magnetizing of magnetic products of different specifications.

B mode: Automatically add spacers, marking and magnetizing the spacer products. The marking mark content and letter size can be set as needed.

The scope of products

Magnetizing Products	Size requirements	Thickness Requirements	Remarks	Magnetic Steel Surface Treatment
Square Slices	Side: 6~25mm	1~5mm	Aspect ratio>1.5	Zinc-plated, nickel-plated
Rectangular Sheet	Length/Width: 6~25mm	1~5mm	The difference in length and width>2mm
Circular Thin Slices	Outer Diameter: 6~25mm	1~5mm
Ring Sheet	Outer Diameter: 6~25mm	1~5mm	Outer diameter minus inner diameter>4 mm

1) The outer diameter of the disk is ≧10mm to add spacers;

2) The difference between the outer dimensions of the spacer and the magnetic piece: <±1mm;

3) Thickness and size requirements of the spacer and the magnetic sheet: the thickness of the spacer is 1~5mm and not less than the thickness of the 2/5 magnetic sheet;

4) Other product sizes that are not in the specification range need to be confirmed according to actual conditions or partial changes.

Corresponding parameter set not found, please add it in property template of background

Rated voltage: AC220V/50HZ ±10%

Rated total power: 2KW

Working pressure: 4~6 kgf/cm2 (kpa)

Capacity: [marking + magnetization]: 100~160 pieces/min; [plus spacer + marking + magnetization]: 50~80 pieces/min

Magnetizing coil

Coil size: inner size: 37*37*H140MM;

Magnetizing magnetic field: ≥3.5T (70mm effective);

Cooling method: water-cooled; built-in temperature switch;

Equipment size

Host 1000*700*1600(L*W*H);

Feeding system 1000*500*1200 (L*W*H).

暂未实现,敬请期待

CONTACT US

Small magnetic sheet automatic marking and magnetizing equipment

PRODUCTS